Drawing 2 storey house design with floor plan does not require an architectural degree as he once did. It requires a bit of divide and conquer thinking, however. You may want to first conquer the design of a one-story house before trying to design two stories, although the design principles of these two projects are essentially the same. Before approaching this project, know the needs of those who will occupy the house. Drawing your own plan, you save money that would have been given to an architect to complete this project. Make or obtain a 3D sketch of the exterior of the proposed house. Draw a picture of an existing house to make this sketch or drawing do the same. Do not worry about what straight lines exactly. Save those in the ground planning stage. The purpose of making a sketch is to have an idea of what the final house will look like, something that is difficult to discern from a floor plan.
Estimate the size 2 storey house design with floor does not require an architectural degree as he once did of the modules of the house from the sketch you draw. The modules are the large rectangular blocks that make up the entire structure of the house. For example, a Dutch colonial house has only one module. An “L” house will have two rectangular modules at right angles. Draw, with a ruler and paper, rectangles whose proportions and orientation match the modules you measured. The rectangles represent the exterior walls of the house for the lower floor. Obviously you will have to reduce the measurements you have made. For example, if the house has a single rectangular module of 40 by 50 feet, draw a rectangle of 8 by 10 inches.
24 Photos Gallery of: Smart 2 Storey House Design With Floor Plan
Draw the same rectangles on another sheet of paper. These represent the exterior of the second floor of the house. Then, draw on the plan of the first story, a rectangle for each room in the first story of the house. As with the outer rectangle, the rectangles represent interiors of the walls of the rooms. Be sure to include at least these rooms: kitchen, bathroom, master bedroom and laundry. Draw another rectangle that indicates where you want the staircase to appear on the first floor. The length of this rectangle must be significantly greater than its width.
Erase the short ends of the rectangle ladder to indicate where the stairs open to the first and second floors. Draw a series of equidistant lines within the rectangle of the stair that are perpendicular to the long sides of the rectangle. These represent individual stairs of the staircase. Do not try to draw the exact number of steps you think the ladder should have. The lines are more than a graphic convention intended to indicate the location of the staircase.