Pool volleyball net – With advances in technology, there are hundreds of different design options when it comes to the construction and installation of the pool on the ground. While there are three basic materials used for the interior walls and the floor of a swimming pool concrete, plastic coating, fiberglass or your tastes and desires dictate the general shape and functioning of the pool. A pool game is a classic example of the meeting form function. A pool game and a traditional rectangular pool are very similar, except in total depth. A traditional pool will descend anywhere from 6 to 8 feet to allow diving. A volleyball net can be suspended above the middle of the pool, creating a perfectly uniform court. A basketball hoop can be added to make your pool a water basketball court.
With a pool game, you can maximize the use of your pool because of everyone, and with very little height. You can swim anywhere in the pool. Another popular option for the function is a swimming pool. A pool is very similar to a pool volleyball net target, but it is usually longer and not so wide. These pools are designed specifically for swimming. a total of 10 pieces of 32 mm tubes should be cut: 4 pieces of 50cm for the base, 4 pieces of 50cm more for the verticals, and 2 pieces of 2m for the horizontal ones. 2 bases are needed, one for each side of the pool. They are assembled with 2 pieces of 50 cm and 1 tee.
24 Photos Gallery of: Pool Volleyball Net Outdoor Decoration Ideas
Glue is applied on the outside of the tube and inside the tee and the pieces of 50 cm are joined horizontally, leaving the third connector of the tee looking up, where later the pillars of the volleyball pole height will go. Make 2 pillars with 4 pieces of 50 cm. They join a pair with a tee in the center and stick an elbow on its top end. Join the pillars with the long pieces of 2 mt of pipe, sticking them on the elbows and the tees that were at the center of the pillars. The pillars of the structure are glued with adhesive on the tee of the base that was up. To give stability to the base you have to fill it with sand, this way it will have weight and it will not fall. Help with a funnel so that the sand enters the tube. With adhesive paste, the PVC hats in the holes of the base, this way they will be covered and the sand will not be able to fall.