Fiberglass pool shell – A pool on the floor sitting in a backyard is a nice place after a hard day at school or work. In the ground pools have a basin that holds their water, and many of those basins are fiberglass shell types. Sometimes, on the floor fiberglass pool owners will find themselves even considering what it would take to convert them to elevated pools. Fiberglass in the ground the shells of the pool are not, really, to be used as completely above the ground pools, however.
Glass fiber Deposits
24 Photos Gallery of: Ideas To Install Fiberglass Pool Shell
Fiberglass recessed pool shells are thin walled and made to be installed in holes dug specifically for each one. All fiberglass under floor pool shells take advantage of the structural support of the floor around the creates. Without sufficient structural support, a fiberglass shell pool on the floor sitting on the ground and filled with water will soon bulge outward and collapse. The immense weight of water in a glass from the fiberglass pool on the floor that is above the ground would be too much for a shell without support to support.
Strength of fiberglass
A fiberglass recessed pool glass is made to be very strong, but it is a creation of thin walls. Most in-ground shells fiberglass pools are 3/16 to 3/8-inch thick and are also flexible. However, a 40-foot long by 20 foot wide by 4-foot deep pool is 24,000 gallons and nearly 200,000 pounds. A hundred tons of pressure water out in a pool of this size that sits completely out of the ground will break the shell. To use a glass fiberglass pool on the pool floor for above ground use, you need to reinforce and prepare properly. Unfortunately, in the pool floor fiberglass shells are not really designed to be used completely off the ground. Very often, only about 18 inches of fiberglass pool glass is allowed to be off the ground without strong structural support supporting it. All fiberglass recessed pools, however, can be built on part of the land, as long as they are adequately supported.
Typically, the fiberglass pool shells placed on the surface have a maximum of 3 feet of exposed shell, with 18 inches of that supported by a retaining wall. One of the reasons for partially exposing the fiberglass in the ground of the shell of the pool is so high that the pool cover can be built around it. If you want a ground fiberglass pool completely above, you will have a specially fortified casing. Fortified fiberglass pool shells for use above ground are thicker and have wider support built into them by their manufacturers.