Salt water pool maintenance, maintenance during the season becomes easier and costs are reduced. But, if you want your salt chlorinator to work in the ideal conditions to get the most out of it and prolong its life and that water is always perfect, it needs, like all swimming pools, to check the levels and do a good cleaning. Keep in mind that, especially in some areas, the pool season is not excessively long, so, ideally, every day that you use it, your pool is perfect. Cleaning: every day you should maintenance the dirt and insects that have accumulated in the skimmers. If your pool is in an area free of trees and so much dirt does not fall, you can space the emptying of the skimmer baskets, which you think is necessary.
pH control: it is very important that you measure the pH of the water every morning, especially in salt pools, since salt chlorination tends to increase it. This should be in values close to 7.2 to be comfortable for people who bathe and for the good condition of the devices. Filtering: connects the purifier about 6 hours a day, better when nobody bathes. If the measurement of pH or chlorine levels indicates alterations, you may have to leave it for longer. If you ever have guests and you have increased the capacity, leave it up to 12 hours running. In general, with the salt water pool maintenance cost, the filtration should be working for a longer time. You can do the filtration during the day, while you are using the pool, without any problem. Make sure, yes, that the total amount of water passes through the filter twice a day.
24 Photos Gallery of: How To Controls Salt Water Pool Maintenance Guide
With saline chlorination pools the interesting thing is that the weekly treatment can be spaced out and done even every two weeks, at times when there is less useful. Salt control: Like the chlorine levels, test the amount of salt in solution in the water. It is very important that you do not go down so that the salt water pool test kit works correctly. The salt does not evaporate, but it can lower its concentration if you do many backwashes of the filter (more frequent in areas with trees). Add salt in the proportion recommended by the manufacturer of your chlorinator for cases in which you need to compensate for salinity. If, on the contrary, the salt level is too high, slightly empty the pool and add new water. especially in pools with hard water, that is to say, with excess lime in its composition.