Retro ceiling lights is popular for both decorative and practical applications. The nature of a hanging light brings it closer to your workplace, such as a kitchen counter or dining table, enabling a more focused light to isolate the area you need without giving too much lighting where you do not want it. There are several things to consider when designing your own hanging light, but taking time to plan ahead will help you create a candle that you will be pleased with for many years to come.
25 Photos Gallery of: Design Of Retro Ceiling Lights
Measure the distance between the ceiling where you want the retro ceiling lights to hang and the place where you want the lowest part of your light. On plain paper, draw a horizontal line near the top of the paper to represent the ceiling. Jump down a box on the paper for every 3 inches distance and drag a line at measurement where you want the underside of light. Twenty two divided by three is 14, so your win should be 14 squares below your top line. Your light design should fall between these two lines.
Determine the type of lamp you want to use for your retro ceiling lights. Halogen lamps give a light, white light but not very long and can generate a lot of heat. The type of lamp you are using will determine the type of lamp socket you need, and will affect the size of your hanging light. CFL bulbs may require a standard size bulb outlet, while candelabra large sockets are available for smaller fluorescent lights, as well as a variety of halogen sockets. LEDs may require special wiring due to lower voltage requirements.industrial lighting for ceilings, retro ceiling lights